PA66 K224-G6

Physical Properties Metric English Comments
Density  1.50 g/cc 0.0542 lb/in³ dry; ISO 1183
Water Absorption  4.8 % 4.8 % beginning dry; ISO 62
Moisture Absorption at Equilibrium  1.4 % 1.4 % beginning dry (23°C/50% R.H.); ISO 62
Linear Mold Shrinkage  0.0030 cm/cm 0.0030 in/in ASTM Data; MD
 
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate  167 MPa 24200 psi 5mm/min; ISO 527
Elongation at Break  4.0 % 4.0 % 5mm/min; ISO 527
Tensile Modulus  11.0 GPa 1600 ksi 1mm/min; ISO 527
Flexural Modulus  9.00 GPa 1310 ksi ISO Data
Izod Impact, Notched (ISO)  17.0 kJ/m² 8.09 ft-lb/in² ISO Test
Charpy Impact Unnotched  10.0 J/cm² 47.6 ft-lb/in² ISO 179
  8.70 J/cm²
@Temperature -30.0 °C 41.4 ft-lb/in²
@Temperature -22.0 °F ISO 179
Charpy Impact, Notched  1.80 J/cm² 8.57 ft-lb/in² ISO 179
  1.50 J/cm²
@Temperature -30.0 °C 7.14 ft-lb/in²
@Temperature -22.0 °F ISO 179
 
Thermal Properties Metric English Comments
Melting Point  257 °C 495 °F 10 K/min
  257 °C 495 °F ASTM Test
 
Descriptive Properties
Color Natural 
Commercial Status Active America 
Impact Modified No 
Primary Processing Technique Injection Molding