PA66 A216V30

Physical Properties Metric English Comments
Density  1.37 g/cc 0.0495 lb/in³ ISO 1183-A
Water Absorption  0.80 % 0.80 % 24 hours in water at 23°C; ISO 62.
Linear Mold Shrinkage  0.0050 cm/cm 0.0050 in/in RHODIA-EP
Linear Mold Shrinkage, Transverse  0.0080 cm/cm 0.0080 in/in RHODIA-EP
 
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate  190 MPa 27600 psi ISO 527
Tensile Strength, Yield  190 MPa 27600 psi ISO 527
Elongation at Break  3.0 % 3.0 % ISO 527
Tensile Modulus  10.0 GPa 1450 ksi ISO 527
Flexural Yield Strength  260 MPa 37700 psi ISO 178
Flexural Modulus  8.40 GPa 1220 ksi ISO 178
Izod Impact Resistance  1.10 J/cm² 5.24 ft-lb/in² ISO 180
Charpy Impact Unnotched  8.00 J/cm² 38.1 ft-lb/in² ISO 179/EU-1993
Charpy Impact, Notched  1.20 J/cm² 5.71 ft-lb/in² ISO 179/1EA-1993
 
Electrical Properties Metric English Comments
Electrical Resistivity  1.00e+15 ohm-cm 1.00e+15 ohm-cm IEC 93
Surface Resistance  6.00e+14 ohm 6.00e+14 ohm IEC 93
Dielectric Constant  3.75
@Frequency 1e+6 Hz 3.75
@Frequency 1e+6 Hz IEC 250
Dielectric Strength  40.0 kV/mm 1020 kV/in IEC 243-1
Dissipation Factor  0.010
@Frequency 1e+6 Hz 0.010
@Frequency 1e+6 Hz IEC 250
Comparative Tracking Index  600 V 600 V IEC 112
 
Thermal Properties Metric English Comments
CTE, linear  25.0 µm/m-°C
@Temperature 23.0 - 85.0 °C 13.9 µin/in-°F
@Temperature 73.4 - 185 °F ASTM E831
Melting Point  263 °C 505 °F ISO 3146-C
Deflection Temperature at 1.8 MPa (264 psi)  255 °C 491 °F ISO 75-2
Flammability, UL94  HB
@Thickness 1.60 mm HB
@Thickness 0.0630 in ISO 1210/UL 94
Oxygen Index  23 % 23 % ISO 4589
 
Processing Properties Metric English Comments
Rear Barrel Temperature  260 - 270 °C 500 - 518 °F 
Middle Barrel Temperature  270 - 280 °C 518 - 536 °F 
Front Barrel Temperature  280 - 290 °C 536 - 554 °F 
Nozzle Temperature  271 - 279 °C 520 - 535 °F 
Melt Temperature  270 - 300 °C 518 - 572 °F 
Mold Temperature  80.0 - 120 °C 176 - 248 °F Surface
Drying Temperature  80.0 °C 176 °F Dehumidifying Dryer
Dry Time  3 - 4 hour 3 - 4 hour 
Moisture Content  <= 0.20 % <= 0.20 % 
Back Pressure  0.138 - 0.345 MPa 20.0 - 50.0 psi 
Fill Speed  200 - 300 mm/sec 7.87 - 11.8 in/sec Peripheral Screw Speed