Contact us：Amy Peng
Mobile: 0086 13662834186
Phone：0086 769-87190386
Fax ：0086 769-87190386
Q Q：249911599
Categories: Polymer; Thermoplastic; Polyethylene (PE); HDPE
Material Notes: Ineos A60-70-162 is a high density polyethylene homopolymer, developed specifically for blow molding food containers on reciprocating screw-type equipment. It exhibits excellent processing characteristics and extremely low odor in the finished container. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.
Key Words: Excellent processability and stiffness
Dongguan Yiding Plastic Raw Materials Co.,Ltd
Name: Richard Wang
Tel :0086 769 87190386
Mobile:0086 13662834186
Email:Richard_philips@163.com
Skype user: richwang16
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.963 g/cc | 0.0348 lb/in³ | ASTM D4883 | ||
| Melt Flow | 0.72 g/10 min | 0.72 g/10 min | ASTM D 1238 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 66 | 66 | ASTM D2240 | ||
| Tensile Strength | 8.96 MPa | 1300 psi | ASTM D638 | ||
| Tensile Strength, Yield | 31.0 MPa | 4500 psi | 2 in/min (50 mm/min); ASTM D-638 | ||
| Elongation at Break | 600 % | 600 % | 2 in/min (50 mm/min); ASTM D-638 | ||
| Flexural Modulus | 0.862 GPa | 125 ksi | ASTM D747 | ||
| 1.552 GPa | 225.1 ksi | Tangent; ASTM D 790 | |||
| Izod Impact, Notched (ISO) | 7.56 kJ/m² | 3.60 ft-lb/in² | at -30C; ASTM D256; ASTM D-256 | ||
| Tensile Impact Strength | 208 kJ/m² | 99.0 ft-lb/in² | ASTM D1822 | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 84.0 °C | 183 °F | ASTM D648 | ||
| Vicat Softening Point | 132 °C | 270 °F | ASTM D1525 | ||
| Brittleness Temperature | <= -75.0 °C | <= -103 °F | ASTM D746 | ||
| Descriptive Properties | |||||
| process | Blow Molding | ||||
